Colorful Aerosol Spray Paint 5 Minutes Surface Dry Time For Wood / Metal

AEROPAK® Spray Paint is a high quality quick drying high gloss paint. It's ideal for odd jobs and touch ups around the house, office or work. It's perfect for indoor or outdoor use on metal, wood, fibreglass and most surfaces.

Directions

1. Remove thoroughly the oil, soil, water stain and dust from the surface to be sprayed.
2. Shake the can well for about half a minute before spraying.
3. Apply first on an invisible part to make sure the selected color is well matched
4. Keep 15-30 cm away from the surface to be sprayed.
5. In case of little paint or only gas out, turn the nozzle 180° and try again.
6. During spraying, keep the can upright within a vertical angle of 45°.
7. After use, clear the valve and nozzle by spraying upside down for a few seconds.

Precautions

1. Content under pressure. Keep away from heat, flame, spark and other source of ignition.
2. Do not spray on objects with direct contact of food.
3. Spray in well-ventilated place. A better coating effect will be gained if operate in a cool, dry and dustless environment.
4. Avoid applying the lacquer on a rainy or freezing day.
5. Do not clash, puncture, or incinerate the can, even after use.
6. Store in a cool, dry place (45°C); Avoid direct sunlight.
7. Keep out of the reach of children

Specifications

PREPARATION

For best results, clean surface of grease, wax, rust and dust. Scuff or lightly sand all glossy surfaces removing any unwanted bumps or flaking paint, then dust off. Prime raw timber or metal with Aeropak primer and allow to fully dry.

APPLICATION

IMPORTANT : Shake the can vigorously for one minute before use. Holding the can 30cm from prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right. Pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat. If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.

For best results, clean surface of grease, wax, rust and dust. Scuff or lightly sand all glossy surfaces removing any unwanted bumps or flaking paint, then dust off. Prime raw timber or metal with Aeropak primer and allow to fully dry.

CORRECT DISPOSAL

Spray unneeded product on to newspaper dispose to waste.
Empty can is recyclable.

SAFETY WARNINGS

Keep out of reach of children
If swallowed seek medical advice immediately.

Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.

Package & Shipping

Certificate

Exhibition

Canton fair in 2016 Canton fair in 2017 Automechanika Shanghai 2017

RFQ:

Q1: Are you manufacturer?
A1: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products, especially in car care products, Aeropak spray paints, tyre sealer and inflators, air dusters, spray adhesives, etc.

Q2: What’s your term of payment ?
A2: Payment terms vary according to order quantity and agency policy, negotiable upon contact. We'll show you the photos of the products and packages before loading the goods.

Q3: What’s your shipping way?
A3: By sea, by air express delivery.

Q4: Can I get a sample?
A4: Yes. Free sample will be sent immediately while the freight will be charged accordingly.

Q5: What is your terms of delivery?
A5: EXW, FOB, CIF,etc.

Q6: How about your delivery time?
A6: Generally, it will take 25 to 30 days after receiving your advance payment.

acrylic spray paint

automotive aerosol paint

Colorful Aerosol Spray Paint 5 Minutes Surface Dry Time For Wood / Metal Images